RM3090E _59 Vehicle Exterior _008792 WINDOW / GLASS _0050247 POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function) J

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function)  Rear Power Window RH does not Operate with Rear Power Window Switch RH  


DESCRIPTION

When the ignition switch is ON, the rear power window regulator motor assembly RH is operated by the rear power window regulator switch assembly RH.

WIRING DIAGRAM

B341201
0.135,0.469 1.969,0.667 1.833,0.198 10 from POWER Relay 2.26,0.656 3.49,0.854 1.229,0.198 10 DOOR R/R 0.188,2.479 0.5,2.677 0.313,0.198 10 K3 0.167,2.667 2.063,3.031 1.896,0.365 10 Rear Power Window Regulator Motor Assembly RH 2.365,2.49 2.677,2.688 0.313,0.198 10 K1 2.344,2.698 4.229,3.063 1.885,0.365 10 Rear Power Window Regulator Switch Assembly RH 4.938,2.698 6.469,2.896 1.531,0.198 10 J5 4.938,2.906 6.938,3.25 2,0.344 10 Power Window Regulator Master Switch Assembly 3.354,1.667 3.51,1.865 0.156,0.198 10 B 3.438,1.802 3.75,2 0.313,0.198 10 SU 3.427,2.167 3.74,2.365 0.313,0.198 10 SD 1.531,1.677 1.688,1.875 0.156,0.198 10 1 1.313,1.885 1.469,2.083 0.156,0.198 10 U 1.313,2.26 1.469,2.458 0.156,0.198 10 D 1.531,2.042 1.688,2.24 0.156,0.198 10 2 2.708,1.677 2.865,1.875 0.156,0.198 10 4 2.729,2.052 2.885,2.25 0.156,0.198 10 1 2.917,1.677 3.073,1.875 0.156,0.198 10 U 2.906,2.063 3.063,2.26 0.156,0.198 10 D 3.354,1.458 3.51,1.656 0.156,0.198 10 3 3.698,1.781 4.01,1.979 0.313,0.198 10 5 3.698,2.188 4.01,2.385 0.313,0.198 10 2 5.094,1.875 5.406,2.073 0.313,0.198 10 U 5.104,2.083 5.417,2.281 0.313,0.198 10 D 4.854,1.76 6.385,1.958 1.531,0.198 10 10 4.844,2.167 6.375,2.365 1.531,0.198 10 18
from POWER Relay
DOOR R/R
K3
Rear Power Window Regulator Motor Assembly RH
K1
Rear Power Window Regulator Switch Assembly RH
J5
Power Window Regulator Master Switch Assembly
B
SU
SD
1
U
D
2
4
1
U
D
3
5
2
U
D
10
18

CAUTION / NOTICE / HINT

NOTICE:
·

Inspect the fuses for circuits related to this system before performing the following procedure.

·

Check that the window lock switch is off before performing the following procedure.



PROCEDURE

1.INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH
a.

Remove the rear power window regulator switch assembly RH.

Click hereVehicle Exterior>WINDOW / GLASS>REAR POWER WINDOW SWITCH>REMOVAL


b.

Inspect the rear power window regulator switch assembly RH.

Click hereVehicle Exterior>WINDOW / GLASS>REAR POWER WINDOW SWITCH>INSPECTION


Result:
Proceed to
OK
NG



OK

2.INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

NG

REPLACE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH

Click hereVehicle Exterior>WINDOW / GLASS>REAR POWER WINDOW SWITCH>REMOVAL


2.INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH
a.

Remove the rear power window regulator motor assembly RH.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW REGULATOR MOTOR(for Rear Door)>REMOVAL


b.

Inspect the rear power window regulator motor assembly RH.

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW REGULATOR MOTOR(for Rear Door)>INSPECTION


Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - BATTERY)

NG

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW REGULATOR MOTOR(for Rear Door)>REMOVAL


3.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - BATTERY)
a.
B276367
0.188,0.906 0.458,1.208 0.271,0.302 1.688,1.677 1.677,1.292 true 0.083,0.104 0.396,0.302 0.313,0.198 10 *a 0.25,0.99 0.563,1.188 0.313,0.198 10 K1 1.656,1.688 1.813,1.885 0.156,0.198 10 B
*a
K1
B
*a Front view of wire harness connector
(to Rear Power Window Regulator Switch Assembly RH)


Disconnect the rear power window regulator switch assembly RH connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
K1-3 (B) - Body ground Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V



Result:
Proceed to
OK
NG



OK

4.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH - REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH - REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH)
a.

Disconnect K3 the rear power window regulator motor assembly RH connector.


b.

Disconnect K1 the rear power window regulator switch assembly RH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K3-1 (U) - K1-4 (U) Always Below 1 Ω
K3-2 (D) - K1-1 (D) Always Below 1 Ω
K3-1 (U) or K1-4 (U) - Body ground Always 10 kΩ or higher
K3-2 (D) or K1-1 (D) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

5.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY)
a.

Disconnect the K1 rear power window regulator switch assembly RH connector.


b.

Disconnect the J5 rear power window regulator master switch assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
K1-5 (SU) - J5-10 (U) Always Below 1 Ω
K1-2 (SD) - J5-18 (D) Always Below 1 Ω
K1-5 (SU) or J5-10 (U) - Body ground Always 10 kΩ or higher
K1-2 (SD) or J5-18 (D) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW MASTER SWITCH>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR